RC3 Rollgitter & Scherengitter
Curtain honeycomb grille
We manufacture our proven rolling grilles out of
|Steel||Aluminium||Stainless steel (V2A & V4A)|
The individual bars made of robust flat material are joined together using special hinges. The bar ends are bent twice by 90° and held in place with an additional cramp. This provides the curtain with a closed grill edge, ensuring that it runs precisely into the guide rails. The curtain, without cross-bar, provides a ventilation diameter of approx. 75 %.
Our rolling grilles are available in 6 different honeycombs and models:
|Straight honeycomb 185 x 120 mm|
|curved honeycomb 160 x 120 mm|
The width of the material is determined by the width of the rolling grille – the wider the grille, the wider the flat material. More details can be found under technical information.
We offer 3 different bottom bars:
Angle 85/55/4 mm: available in galvanised or stainless steel. The lower arm is cut on each side based on the guide rail depth. A c-profile may optionally be fastened under the bracket for attaching the seal profiles.
Large aluminium extruded rail: the integrated c-profile is suitable for attaching seal profiles with Braselmann foot. The surface is mill-finished as standard; if requested: silver E6EV1 anodised or colour powder-coated.
Small aluminium extruded rail: especially suitable for guide rails with a small clear opening. This bottom bar is ideal for rolling grilles rolling up in boxes. The surface is mill-finished as standard; if requested: silver E6EV1 anodised or colour powder-coated.
All folding grilles are fitted with a full-length suspension profile as top end piece. Individual suspension hooks are inserted into this profile. The suspension hooks are fitted with an elongated hole for fastening on the shaft.